我的木工工具-压刨（Thickness Planer）
文章来源: woodsensor 于 2014-03-08 19:04:39
我的压刨是德伟735（DW735），该机器有3个刀片，双速调控，最大木头通过厚度为6英寸。我已经用过两个同样的机器，目前是第三个，前面两个基本用1-2年就买了，添点钱重新买新的。

这款机器对从家庭木工坊规格的使用者来的评价等级很高，在西方的木工爱好者中非常普及。但是经过多年使用，发现这款机器有几个缺点，一是噪音巨大，运行时可以达到100-120dB，不带放噪耳机久了肯定会对听力有影响，二是对15amp的电路来说，如果进刀过深，容易造成配电箱跳闸，还有就是换刀的费用不菲。

和其它机器一样，我也给它做了个架子，装上滚轮，下面放砂轮打磨机，以充分利用空间。






产品特点如下

Product Features
  • Powerful 15.0 Amp, 20,000 rpm motor handles larger cuts in wider materials with ease
  • Three knife cutter-head with 10,000 RPM cutter head speed delivers 30% longer knife life and makes knife change faster and easier
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
  • Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
  • 19-3/4" cast aluminum base is 2X more rigid than a standard 10" base and folding tables
  • Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
  • Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
  • Extra-large turret depth stop allows user to return to most frequently used thicknesses with ease

机器指标如下
Specifications
Amps 15.0Amps
No Load Speed 20,000 (motor)/10,000 (cutterhead)rpm
Max Depth of Cut 1/8"
Depth Capacity 6"
Width Capacity 13"
Tool Weight 92lbs
Shipping Weight 100lbs